How do I choose the right seating arrangement / spa shell design?

When choosing seating arrangement / spa shell design, you should consider for what purpose(s) your spa will be used.

Are you looking for hydrotherapy massage? A place to get together and relax with family? Maximum seating to entertain friends? Or a combination of the above? Also evaluate what types of seats you find comfortable and easily accessible.

 

Can you deliver my spa?

Yes, We can deliver your new spa. We can arrange for the spa to be on its side this means that it can be manoeuvred through gaps as narrow as 1m. In difficult access situations, a ‘hiab’ truck or crane can be used. The cost of using a crane for delivery is often much less than you may expect.

 

How do I wire my spa to the house?

There are generally three different systems in use by spa manufacturers:

By a RCD, 15 amp & 32 amp - These spas need to have a separate power supply back to main fuse board. With a weather proof exterior plug. This system allows for the heater and jet pumps to all run at the same time. It is also required on spas that operate two jet pumps.

 

How do I keep the water clean?

At Menzies, we offer a variety of different systems including the 'worry free' Simple Silver solution, chlorine & bromine please see our spa chemical & treatment page.

 

How often do I have to replace the water in my spa?

On average, your spa’s water should be replaced every 3-4 months. If the spa has very heavy use, this may be required more often.

 

How much does a spa cost to run?

Most retailers will tell you ‘about a dollar a day’. In many cases, this is just a guess as running costs are very dependent on the local climate, season and the amount of the use your spa is receiving. A well insulated spa with a circulation pump can actually operate for less than this amount in some situations, whilst a poorly insulated spa can cost 2 or 3 times this amount.

 

What other considerations are there when placing my spa?

Not many. If the spa is fitted with a circulation pump, noise should not be a problem. Ensure that there is good access to all sides of the spa if servicing is required, particularly on the control panel side of the spa where equipment such as pumps are usually installed. This side should have at least 600mm of clearance.